The EnGenius SN-ULTRA-AS (Antenna Splitter) is very important for enterprise use when 900 MHz signal needs to be spread over a wide area. Because of this, special attention must be paid to the features and capabilities of this component.
Connect the Reverse Thread TNC Connector (Port 3) to the included 3 meter coaxial cable, and then attach the other end of this cable to the base unit's antenna connector.
Note: EnGenius base unit's antenna connector uses a reverse thread TNC adapter and is turned clockwise to remove.
Connect the Reverse Thread TNC Connector (Port 1 or Port 2) to the Antenna Kit, SN-ULTRA-AK20L and the SN-UL-AK20L-IND
Note. Because two antennas are using the splitter, the signal for each antenna will be weaker than if the signal went straight to a single antenna without running through the splitter. The more times the signal is split, the weaker it will become. EnGenius generally does not recommend using more than one splitter in a deployment. On some occasions, two splitters may be required. Beyond two splitters, the increase in area will be offset by the loss in signal strength because of the antenna and splitters.
There are the many users seen the function for knowing here how to clear bing search history and access the setting of windows here.
Please sign in to leave a comment.