This article will show you how to use bulk update on ezMaster software.
Please make sure that you have the ezMaster installed and active/running on a host computer.
Open your web browser (i.e. Internet explorer, Google Chrome, Mozilla Firefox)
Type the IP address of the ezMaster to the address bar of your web browser. Type the login credentials you created upon installing the ezMaster software.
#1 Click on the Project”
#2 Click Bulk Update (Under Maintenance)
Please make sure that you have the RAW Firmware file saved on a host computer.
#3 Click Upload File
#4 Click Choose file and locate the RAW firmware that you saved on the host computer
#5 Click Apply to upload the RAW firmware file to ezMaster Software
#6 Click OK once the upload is completed.
(You can also upload firmware for more than one AP model and have it available within ezMaster.)
#7 Select the correct firmware file and the access point/s respectively and click Add to Upgrade
#8 Wait for the firmware to upload to the Access Points
Note: The above also applies to Bulk Update (Switch)
Your article content is being interested by a lot of people, I am very impressed with your post. I hope to receive more great articles. time calculator
I think you did the best explain about ezMaster software,
if you need another software check,
#1 Click on the Project” · #2 Click Bulk Update (Under Maintenance) · Please make sure that you have the RAW Firmware file saved on a host ...For more go on Grerem
This version of the software is currently available only to early adopter ... You can use the bulk update feature in BMC Helix ITSM: Asset ...https://haniem.com/
Bulk update is a useful feature in ezMaster software that allows you to quickly and easily update multiple devices with the same configuration or firmware at the same time https://subwaysurf.io
Please sign in to leave a comment.