Managed PoE Switch
- I cannot save AP settings changes on the Controller after updating the EWS2910P firmware to v1.05.42_c1.8.55.
- Naming Convention: PoE/PoE+ Switches
- My EGS2108P locks up when DHCP lease time is up on the connected DHCP server.
- White Paper: Using VLANs with EnGenius APs and Switches
- Can I connect non-PoE devices to the PoE switch's PoE ports?
- How can we identify if the EGS2110P is a V1 or a V2?
- How to update Neutron APs managed by a Neutron switch via OCU
- SNMP support for the EGS2108P, EGS2110P, and EGS5110P
- Is there an option to back up the configuration file on the EGS2108P?
- Compatible SFP transceiver specifications (Connector type, Wavelength, Fiber type).
- Why does EGS5110P display "0:timeout" when you change the IP?
- How can we identify if the EGS2110P is a V1 or a V2. What is the difference between V1 and V2? Are there any features on the V2 that is not on the V1?
- Why can't I ping between 2 computers connected on EGS2110P?
- How many VLAN profiles can be specified on the EGS7228P?
- Is there a way to set up multiple VLAN profiles at once on the EGS7228P?
- A computer is connected to port 5 of an EGS7228P switch. The untagged VLAN has a VLAN ID of 2 but the computer is not getting a valid IP from that VLAN.
- Does the EGS7228P support the Cisco Discovery Protocol (CDP)?
- On the Controller of the EWS5912FP, there is no option to enable the Captive Portal feature for the main 2.4GHz/5GHz SSID profiles.
- The EWS5912FP switch was updated to firmware version 1.05.26-c1.6.24. When configuring the SSID profile for managed Neutron APs, Client Isolation automatically enables when L2 isolation is enabled.
- Does EnGenius switch supports Discovery Protocol to allow IP phones to automatically connect to the voice VLAN (LLDP-MED)?
- I cannot set Captive Portal on 2.4GHz/5GHs SSID profile using Neutron Controller on EWS5912FP.
- What do the Trunk1 to Trunk8 under PVID of my EWS5912FP switch refer to?
- Client Isolation is automatically enabled when L2 isolation is enabled on the EWS5912FP Wireless Controller software
- There is no “Under Approval” button on EWS5912FP Controller GUI.
- Cannot enable Rogue AP detection on EWS5912FP
- How can I access EWS5912FP through the console port?
- How can I access EGS7252FP through the console port?
- How can I access EGS5212FP through the console port?
- How can I access EGS7228FP through the console port?
- How can I access EGS7228P through the console port?